Thursday, January 24, 2013

Sunburst Art Project

I have seen a few sunburst projects on Pinterest lately so I thought I would give it a try myself.  I didn't want a mirror because I wanted it for my bedroom originally and I didn't want to accidentally catch a glimpse of myself in the morning and feel bad about myself all day. So i decided to just go to the craft store and figure out what to do.  In Los Angeles, in the Wilshire District, that is easier said than done. There are NO craft stores that are less than 1-1/2 hours away. Can you believe it? There are art supply stores but no real honest to goodness good old corporate America craft stores... What's a girl to do.  There is an art store on Beverly in Hollywood, which is close by so I decided to go with my husband, the artist, to check it out.  To my amazement there were dowels and paper and all sorts of things! I was beside myself.  No yarn... No for now I will have to stick with the expensive mom and pop shops/ordering online and paying exorbitant shipping fees for my yarn needs.  At least I can find pretty paper and paint now.  My anxiety is lessening.

Anywho I find some beautiful paper that is dyed and sold locally.  I figured I would give it a try to use this paper.   Here is a peak of the paper.

When I saw this perfect paper, my mind started racing thinking of all the possibilities.  Then I remembered my unused embroidery hoop.  I thought about it for a second and then decided how brilliant I was.  I skipped over to the area with the dowels and grabbed a package and ended up using 18, I think.  Then I picked out my paint and my husband and walked over to the cash register with our hands and hearts full.

The first thing I did when assembling my sunburst is I took apart my embroider hoop and traced it on a piece of cardboard that came with the paper pack and on the backside of the paper itself.

The next thing I did was measure out the dowels.  I started out with the four longest.  You can make it as big as you want but I wanted mine pretty large because I have big empty 15-foot plaster walls.  At first I cut three different sizes.  Four 16-inch, four 13-inch, and eight 11 inch.  I wanted the large ones to stick out 15 inches from the center, the medium to stick out 12 inches, and the small to stick out 10, so I added an extra inch to each dowel.  i.e. 16-inch, etc.  All I used was an old serrated knife to cut.

After I had all those cut I used some spray adhesive and attached the paper to the round cardboard that I cut.  Then I set it aside and let it dry.  Once I had that drying, I started painting.  It took a few coats.  In hind sight, I might sand lightly sand the dowels and embroidery hoop before I paint them.   The sponge brush I used kept getting caught up on the rough edges.  I had to use a couple of coats to cover them completely.

While those were drying, I used my ruler and found the exact center of the cardboard and paper round.  I made a big X in the middle to use as a guide on the back for where to glue the dowels.

After the dowels and the inner part of the embroidery ring were completely dry, I hot glued all the pieces together.  First I glued the paper and cardboard round to the embroidery ring then glued the longest four dowels using the X that I made previously as a guide.  After that I eyeballed it.

Once I got them all on and took a look at it, it lacked something.  There was no real Umph to it so I decided to add more dowels.  These ones I cut at 9-1/2 inches.  When I was putting them in between all of the 11-inch dowels to see how more would look, I discovered I really liked the two-toned burst look.  This goes to show you that you should never have a completely unmovable picture of what you want made when you set out crafting.  It is only once I did this that I fell in love with the look of the thing! After I glued all 16 dowels between all the gray ones, I figured I wanted the ring to be two-toned as well so I dis-assembled the outer embroider loop.  All I did was tighten remove the screw all the way and take a blade and slowly and carefully lift the metal off of the wood.  Then I glued the outer one (with a little piece of dowel to close the ring) on outside of the smaller ring and vuala! Beautiful sunburst! The very last thing I did was to glue a small piece of dowel I had left over to to be a nail perch.  (This was only after I hung it on the wall to see how it looked to have it fall to the ground.  A dowel fell off and I had to re-glue it.  Bone head move... no doubt.)

There is definitely a sort of giddy delight I get when looking at a finished project that has turned out so well.  It is like falling in love only not... Okay, I know I'm getting carried away but you crafters out there know what I mean. Here is one more picture of the finished project.  I love it so much!

1 comment:

Dede said...

I am not seeing much since 2013 - are you an active blogger still?